A propagation model,
calibrated in the field

Sogudo computes how the mobile signal spreads from every declared antenna, then corrects the model with measurements taken on the ground. The result compares carriers independently at any point of a territory.

Three steps from antenna to API

  1. 01Data ingestion

    We locate every antenna

    We collect the exact position and technical characteristics of every 3G, 4G and 5G antenna from 21 official national regulators (ANFR, ANATEL, ACMA, ISED, UKE, MSIT and more).

  2. 02Propagation model

    We simulate how signal travels

    From each antenna, our algorithm computes signal propagation in 3D - accounting for terrain elevation, buildings, distance and atmospheric conditions. Every square metre gets a computed signal quality score.

  3. 03Ground truth

    We calibrate with field data

    Real-world speed measurements are compared with what the model predicts at the same spot, and the gaps are used to correct it. The calibrated model then gives every carrier a comparable value at any point of the country.

Official antenna registers

Antenna positions come from the registers that national regulators make public. No carrier feeds the model. Each of the 21 live countries has its own antenna dataset built from these official sources.

  • ANFRFrance

    ANFR / Arcep

    Agence Nationale des Fréquences - official register of all antennas declared in metropolitan France and overseas territories.

  • ANATELBrazil

    ANATEL

    Agência Nacional de Telecomunicações - Brazilian telecom regulator. Provides licensed site and antenna data for all operators.

  • ISEDCanada

    ISED

    Innovation, Science and Economic Development Canada - publishes the national spectrum and antenna database.

  • ACMAAustralia

    ACMA

    Australian Communications and Media Authority - registers all radiocommunications licences including mobile base stations.

  • MSITSouth Korea

    MSIT

    Ministry of Science and ICT - the authority publishing the official South Korean antenna dataset, covering all three national carriers.

  • UKEPoland

    UKE

    Urząd Komunikacji Elektronicznej - Polish regulator. Publishes the register of radio permits for every base station.

  • RTRAustria

    RTR

    Rundfunk und Telekom Regulierungs-GmbH - Austrian regulator. Publishes the location of mobile transmitters.

  • BIPTBelgium

    BIPT

    Belgian Institute for Postal Services and Telecommunications - publishes the antenna sites of the Belgian carriers.

  • COMREGIreland

    ComReg

    Commission for Communications Regulation - Irish regulator. Publishes the national site viewer of mobile base stations.

  • SUBTELChile

    SUBTEL

    Subsecretaría de Telecomunicaciones - Chilean authority. Publishes the authorised mobile sites of each carrier.

  • GEOGlobal

    Terrain & elevation data

    Digital elevation models (SRTM, Copernicus DEM) to simulate how terrain blocks or reflects radio waves in 3D.

Every register we use

  • ACMAAustralia
  • AKOSSlovenia
  • ANATELBrazil
  • ANFR / ArcepFrance
  • BIPTBelgium
  • ComRegIreland
  • DigitaliseringsstyrelsenDenmark
  • EETTGreece
  • HAKOMCroatia
  • ILRLuxembourg
  • ISEDCanada
  • MSITSouth Korea
  • NTCPhilippines
  • OFCOMSwitzerland
  • RATELSerbia
  • RDINetherlands
  • RSMNew Zealand
  • RTRAustria
  • SETIDSpain
  • SUBTELChile
  • UKEPoland

An algorithm that keeps improving

Each factor below enters the model as soon as a country publishes the data for it, so precision improves country by country.

  1. Antenna characteristics

    Height, azimuth, tilt and frequency band of each antenna. Regulators do not all publish the same fields, and the model uses every one that exists in a given country.

  2. Terrain

    Elevation models show where hills and valleys block or reflect the signal.

  3. Buildings and land cover

    Building height, forests and open ground change how far a signal carries. They enter the model country by country as the data becomes available.

  4. Network load

    Where load data exists, the model reflects the speed shared between users and not only the signal level.

  5. Growing every day

    Measurements from our users

    Every speed test run by a Sogudo user is compared with the model. The more tests come in, the more precise the next calculation gets.

Recognised research

Our propagation model was validated with Inria, the national research institute for digital science, and Sogudo is supported by Bpifrance.

  • Inria
  • Bpifrance

Ready to embed precise coverage?

Tell us your use case - we scope a plan with you.